- Solutions
-
Products
- Level 4 EV Charging Station
- Level 3 EV Charging Station
- J1772 Charging Station
- NACS Charging Station
- CCS1 Charging Station
- CCS2 Charging Station
- Mode 4 EV Charger
- Mode 3 EV Charger
- Mode 2 EV Charger
- Level 2 EV Charging Station
- Level 1 EV Charging Station
- PV ESS EV Charging Station Wholesale
- Portable EV Charging Station
- AC Charging Station
- DC EV Charger
0102030405
China 120-180KW DC Charging Station - High Efficiency from Top Suppliers and Factory for Electric Vehicles
Olink
Parameter / Specification Sheet:
| Rated Input Voltage | 380VAC±20% |
| Max Input Current | 232A / 304A / 348A |
| Rated Output Power | 120KW / 160KW / 180KW |
| Output Voltage | 200–1000VDC |
| Communication | 4G, Bluetooth, Ethernet (Optional) |
| User Authentication | APP, RFID Card |
| IP Rating | IP54 |
| Charging Port | GB/T 20234.2-2015, CCS, CHAdeMO, NACS |
| Cable Length | 5 meters (can be customized) |
| Working Environment | Altitude <2000m, Temperature: -20℃ ~ 65℃; Derating work required above 50℃ |
| Shell Color | White / Gray (Optional) |
| Dimension | 750mm × 456mm × 1600mm (L×W×H) |
| Number of Connectors | 2 |
| Display | 7-inch LCD (Touch Screen) |
| Working Temperature | -20℃ to 50℃ |
| Relative Humidity | 5%–95% RH (non-condensing) |
| Communication Protocols | OCPP 1.6 / OCPP 2.0 |
| Charging Standard | GB/T, CCS, CHAdeMO, NACS (Optional) |
| Security Protection | Leakage, short-circuit, overvoltage, undervoltage, phase absence, overcurrent, reverse, lightning, grounding, over temperature, contactor adhesion, insulation detection. |
| Design Standard | GB/T18487.1 |
Olink
Product Appearance Structure Diagram (mm):
Olink
DC 120-180kw Dual Gun Integrated Type Features:
- 98% peak energy efficiency + 20,000 cycle lifespan
- Five-dimensional protection (lightning / immersion / vibration / salt spray / overload)
- Dual-port intelligent power distribution (180kW single-port or 90kW×2 dual-port output)
- 4G / Ethernet dual-mode communication, supports remote firmware upgrades
⚡
Energy Efficiency Revolution
96% peak conversion rate + 5,000 cycle lifespan, with a cost per kilowatt-hour (kWh) of less than $0.018.
🛡️
Heavy-Duty Protection
MIL-STD-810G military certification, featuring a six-dimensional safety shield (overload, short circuit, water immersion, vibration, salt spray, electromagnetic interference).
📡
Smart Platform
5G + satellite dual-mode communication, pre-installed fleet management system, supporting networking and dispatching for up to 100 devices.
🔋
Extreme Output
1000V ultra-high voltage platform, commercial truck charging efficiency increased by 40% compared to traditional charging stations.
Product Services & Customization:
Core of B2B Operational Infrastructure
- Protocol Blitzkrieg: Automaker ultra-fast charging protocols (e.g., Tesla V4) integrated in 48 hours
- Hardware Sovereignty: Power stacking (180kW → 1MW cluster)
- Regional Readiness Kits: MCS version for North America, 800V version for Europe, explosion-proof version for the Middle East
Frequently Asked Questions (FAQ)
❓ What output power options are available for the Olink DC 120-180kW Dual Gun charger?
The Olink DC Dual Gun Integrated charger is available in three output power configurations: 120kW, 160kW, and 180kW, making it suitable for a wide range of commercial EV charging applications.
❓ Which charging standards does this DC EV charger support?
This charger supports multiple international charging standards including GB/T 20234.2-2015, CCS (Combined Charging System), CHAdeMO, and NACS, ensuring broad compatibility with electric vehicles worldwide.
❓ Can the Olink DC charger be managed remotely via a software platform?
Yes. The charger supports OCPP 1.6 and OCPP 2.0 communication protocols and features 4G/Ethernet dual-mode connectivity, enabling full remote monitoring, management, and over-the-air firmware upgrades through a central management system.
❓ What safety protections are built into the Olink DC 120-180kW charger?
The charger includes comprehensive safety protection covering leakage, short-circuit, overvoltage, undervoltage, phase absence, overcurrent, reverse polarity, lightning surge, grounding fault, over-temperature, contactor adhesion, and insulation detection.
❓ Is the Olink DC charger suitable for outdoor installation?
Yes. The charger is rated IP54 for dust and water resistance and is designed to operate in temperatures ranging from -20℃ to 65℃, making it well-suited for outdoor commercial and fleet charging environments.
❓ Can the Olink DC 120-180kW charger be customized for different regional markets?
Absolutely. Olink offers regional customization including MCS versions for North America, 800V platform versions for Europe, and explosion-proof versions for the Middle East. Cable length, shell color, charging standards, and communication modules can also be tailored to meet specific project requirements.